✦ DIY ATLAS

Home / Categories / 3D printing basics

3D printing basics

3D print game token tray — accessible cleaning — with uneven existing surfaces

Topic 257,779 of 500,000 · print project

This project focuses on 3d print game token tray, with the practical aim of accessible cleaning — with uneven existing surfaces. The exact measurements, compatible products and repair methods depend on your particular item and site.

Safety and suitability: Check all materials and tool instructions. Stop if the work involves load-bearing structure, live mains electricity, gas, hazardous dust, unknown chemicals or unsafe pressurised systems. Seek qualified help where required.

Tools and materials

  • 3D design or slicer software
  • Calipers and a small test print
  • 3D printer with a suitable material profile
  • Deburring tool and safe part-removal tools
  • Parts or materials specifically compatible with game token tray and the intended task

Step-by-step approach

  1. Define the specific objective for game token tray. Start with the function and mating dimensions before appearance.
  2. Plan for accessible cleaning — with uneven existing surfaces. Avoid blind corners and trapped cavities; check whether tools and cleaning cloths can reach the finished surfaces.
  3. Identify what the object must hold, fit, clear or protect; set tolerances by measuring mating parts.
  4. Create the main geometry with sensible wall thickness, fillets and overhangs for the selected printer.
  5. Check high and low spots, use suitable packers or plan a flexible fit without forcing components out of alignment.
  6. Inspect the model for open meshes, thin walls and unsupported islands before slicing.
  7. Slice with a suitable material profile; inspect every layer and use a small fit test before committing to a full print.
  8. Remove safely, inspect fit and layer bonding, and revise areas that show interference, fragile features or excessive support use.
  9. Check the result against the original goal. Avoid blind corners and trapped cavities; check whether tools and cleaning cloths can reach the finished surfaces.

Working through this situation

Main priority: Avoid blind corners and trapped cavities; check whether tools and cleaning cloths can reach the finished surfaces.

Practical obstacle: Check high and low spots, use suitable packers or plan a flexible fit without forcing components out of alignment.

Before calling it finished

Check fit, usability, fixings, accessibility, maintenance access and whether the project performs its intended job. Follow specialist instructions for your exact materials; never treat this general workflow as a certified construction, electrical or medical procedure.

Related projects